Ceramic Tiles Testing Interlocking Tiles( Paver Block), Cement Concrete(CC) Tile, Cement Concrete Chequred Tile, Kerb Stone

Natural and Building Stone (Marble,Granite,Kota Stone, Red Sand Stone etc.)

Water Analysis

• pH, TDS,TSS,Turbidity,Elctrical Conductivity
• Chloride, Sulphate, Acidity,Alkalinity
• Calcium, Magnesium, Iron, Fluoride etc

Waste Water Analysis

• pH, TDS, TSS, Turbidity
• BOD, COD, DO, Oil and Grease etc.

Concrete NDT Testing

• Rebound Hammer
• Rebound Hammer test is a Non-destructive testing method of concrete which provide a convenient and rapid indication of the compressive strength of the concrete. 

Ultrasonic Pulse Velocity

• Ultrasonic pulse velocity (UPV) test is used to check the quality of concrete also defects within concrete by passing electronic waves through the concrete.

Half Cell Potential Test

• It is used to determine the probability of corrosion within the rebar in reinforced concrete structures

Carbonation Test

• Carbonation is a process in which carbon dioxide from the atmosphere diffuses through the porous cover concrete and may reduce the pH to 8 or 9, at which the passivating /oxide film is no longer stable.

Cut and Pull Out(CAPO) Test

• The Cut and Pull Out (CAPO) is a reliable test method to determine the in-situ compressive strength of concrete. The groove is recessed through the center hole by a diamond tool with a similar shape as a dentist's drill, larger at the tip than at the base.

Cover Meter Test

• Cover meter test is a nondestructive test which is used to specify the location of reinforcement bars in concrete and determine the exact concrete cover needed.